FRENES

Ford Kuga III PCD

from 2019
VERIFIED
⌀63.4
PCD5x108
Centre bore63.4 mm
Offset (ET)ET50
Fixing typeM12x1.5
Tightening torque135 Nm
Original tyres225/65R17, 225/60R18
Hub centric rings 63.4 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ford Kuga III

A Ford Kuga III (from 2019) uses a 5x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
  • Offset: the original is ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 135 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/65R17, 225/60R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 63.4 mm 7Jx17 ET50 225/65R17
Version 2 5x108 63.4 mm 7.5Jx18 ET50 225/60R18

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Ford Kuga III without rings. Offset, width, diameter and caliper clearance still need checking.

Ford Tourneo Courier from 2023 Ford Transit Courier from 2023 Ford Mustang Mach-E from 2020 Ford Puma (J2K) from 2019 Ford Focus IV from 2018 Ford Tourneo Connect 2013–2022 Ford Kuga II 2012–2019 Ford Focus III 2011–2018 Ford Grand C Max 2010–2019 Ford Kuga I 2008–2013 Ford Edge 2006–2015 Ford S Max 2006–2015 Ford Focus ST 2005–2013 Ford C Max 2003–2010 Ford Transit Connect 2003–2013 Ford Focus RS 2002–2003

Will wheels from another vehicle fit your Kuga III?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Ford Kuga III?

A Ford Kuga III (from 2019) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Ford Kuga III need a hub centric ring?

The centre bore (hub diameter) of a Ford Kuga III is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford Kuga III?

The recorded original offset is ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ford Kuga III?

The specified tightening torque is 135 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ford Kuga III?

With the same PCD (5x108) and the same centre bore (63.4 mm), these include: Ford Tourneo Courier, Ford Transit Courier, Ford Mustang Mach-E, Ford Puma (J2K). Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.