A Ford Ranger P703 (from 2022) uses a 6x139.7 PCD and a centre bore of 93.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 93.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 93.1 mm.
Offset: the original is ET30 to ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 255/70R16, 255/65R18, 255/55R20, 285/70R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Generations of the Ford Ranger
Previous generation: Ford Ranger T6 (2011–2022) — same 6x139.7 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.
The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.
Version
PCD
Centre bore
Wheel
Offset
Tyre
Version 1
6x139.7
93.1 mm
7Jx16
ET55
255/70R16
Version 2
6x139.7
93.1 mm
7.5Jx18
ET55
255/65R18
Version 3
6x139.7
93.1 mm
8Jx20
ET55
255/55R20
Version 4
6x139.7
93.1 mm
8.5Jx17
ET30
285/70R17
Vehicles with the same PCD and centre bore
Same 6x139.7 PCD and same 93.1 mm centre bore: wheels from these vehicles bolt on and centre on a Ford Ranger P703 without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 93.1 mm, and will not fit if it is smaller.
A Ford Ranger P703 (from 2022) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.
Does a Ford Ranger P703 need a hub centric ring?
The centre bore (hub diameter) of a Ford Ranger P703 is 93.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Ford Ranger P703?
The recorded original offset is ET30 to ET55 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
Which vehicles have the same PCD as a Ford Ranger P703?
With the same PCD (6x139.7) and the same centre bore (93.1 mm), these include: Ford Ranger T6, Ford Ranger, Ford Bronco, Volkswagen Amarok II. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more