FRENES

Honda Civic EK PCD

1995–2000
VERIFIED
⌀56.1
PCD4x100
Centre bore56.1 mm
Offset (ET)ET45
Fixing typeM12x1.5
Tightening torque108 Nm
Original tyres175/70R13, 175/65R14, 185/65R14, 185/60R14
Sauf 1.8 VTi (fiche à part)
Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Honda Civic EK

A Honda Civic EK (1995–2000) uses a 4x100 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
  • Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/70R13, 175/65R14, 185/65R14, 185/60R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (5)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 56.1 mm 5Jx13 ET45 175/70R13
Version 2 4x100 56.1 mm 5Jx14 ET45 175/65R14
Version 3 4x100 56.1 mm 5Jx14 ET45 185/65R14
Version 4 4x100 56.1 mm 5Jx14 ET45 185/60R14
Version 5 4x100 56.1 mm 5.5Jx14 ET45 185/60R14

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Honda Civic EK without rings. Offset, width, diameter and caliper clearance still need checking.

Honda Jazz GR from 2020 Honda WR-V from 2017 Honda Jazz GK 2015–2020 Honda Insight 2009–2014 Honda Fit from 2008 Honda Jazz 2002–2008 Honda Civic EP/EU 2000–2005 Honda Life Dunk 2000–2003 Honda Insight ZE1 1999–2006 Honda Logo 1999–2002 Honda CRX 1992–1999 Honda Civic EG 1991–1995 Honda Concerto 1991–1994 Honda Civic EF 1987–1991 Honda CRX ED/EE 1987–1991 Honda Civic 1983–1987

Will wheels from another vehicle fit your Civic EK?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Honda Civic EK?

A Honda Civic EK (1995–2000) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Honda Civic EK need a hub centric ring?

The centre bore (hub diameter) of a Honda Civic EK is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Honda Civic EK?

The recorded original offset is ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Honda Civic EK?

The specified tightening torque is 108 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Honda Civic EK?

With the same PCD (4x100) and the same centre bore (56.1 mm), these include: Honda Jazz GR, Honda WR-V, Honda Jazz GK, Honda Insight. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.