FRENES

Honda Civic PCD

1983–1987
VERIFIED
⌀56.1
PCD4x100 or 5x114.3
Centre bore56.1 or 64.1 mm
Offset (ET)ET45 to ET55
Fixing typeEcrous - 12x1.50
Tightening torque108 Nm
Original tyres175/70R13, 185/70R14, 195/65R15, 205/55R16
⚠ This model comes with 4x100 or 5x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 56.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Honda Civic

A Honda Civic (1983–1987) uses a 4x100 or 5x114.3 PCD and a centre bore of 56.1 or 64.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 or 5x114.3 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
  • Offset: the original is ET45 to ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/70R13, 185/70R14, 195/65R15, 205/55R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (5)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 56.1 mm — ET45 —
Version 2 4x100 56.1 mm — ET45 175/70R13
Version 3 4x100 56.1 mm — ET45 185/70R14
Version 4 5x114.3 64.1 mm — ET55 195/65R15
Version 5 5x114.3 64.1 mm — ET55 205/55R16

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Honda Civic without rings. Offset, width, diameter and caliper clearance still need checking.

Honda WR-V from 2017 Honda Insight 2009–2014 Honda Fit from 2008 Honda Jazz 2002–2008 Honda Life Dunk 2000–2003 Honda Logo 1999–2002 Honda CRX 1992–1999 Honda Concerto 1991–1994 Honda Accord 1982–1990 Nissan Dayz from 2023 MG MG3 from 2017 Mini Coupe 2011–2015 Citroen C-Zero from 2010 Mitsubishi i-MiEV from 2010 Peugeot iON from 2009 Mini Cooper Clubman from 2007

Will wheels from another vehicle fit your Civic?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Honda Civic?

A Honda Civic (1983–1987) can have a 4x100 or 5x114.3 PCD depending on the version: check on an original wheel.

Does a Honda Civic need a hub centric ring?

The centre bore (hub diameter) of a Honda Civic is 56.1 or 64.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Honda Civic?

The recorded original offset is ET45 to ET55 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Honda Civic?

The specified tightening torque is 108 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Honda Civic?

With the same PCD (4x100) and the same centre bore (56.1 mm), these include: Honda WR-V, Honda Insight, Honda Fit, Honda Jazz. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.