Honda CRX PCD

1992–1999

VERIFIED

Centre bore56.1 mm

Offset (ET)ET45

Fixing typeEcrous - 12x1.50

Tightening torque108 Nm

Original tyres185/60R14

Hub centric rings 56.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Honda CRX

A Honda CRX (1992–1999) uses a 4x100 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 185/60R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Honda CRX without rings. Offset, width, diameter and caliper clearance still need checking.

Honda WR-V from 2017 Honda Insight 2009–2014 Honda Fit from 2008 Honda Jazz 2002–2008 Honda Life Dunk 2000–2003 Honda Logo 1999–2002 Honda Concerto 1991–1994 Honda Civic 1983–1987 Honda Accord 1982–1990 Nissan Dayz from 2023 MG MG3 from 2017 Mini Coupe 2011–2015 Citroen C-Zero from 2010 Mitsubishi i-MiEV from 2010 Peugeot iON from 2009 Mini Cooper Clubman from 2007

Will wheels from another vehicle fit your CRX?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Honda CRX?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Honda Jazz 2002–2008 Wheels from Honda Civic 1983–1987 Wheels from Honda Accord 1982–1990 Wheels from Nissan Dayz from 2023

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.1 mm, and will not fit if it is smaller.

Honda Prelude ⌀64.1 Renault Twingo E-Tech ⌀60.1 Hyundai Inster ⌀54.1 Dacia Jogger ⌀60.1 Dacia Spring ⌀60.1 Hyundai Bayon ⌀54.1 Toyota Aygo X ⌀54.1 Dacia Sandero III ⌀60.1

Frequently asked questions

What is the PCD of a Honda CRX?

A Honda CRX (1992–1999) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Honda CRX need a hub centric ring?

The centre bore (hub diameter) of a Honda CRX is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Honda CRX?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Honda CRX?

The specified tightening torque is 108 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Honda CRX?

With the same PCD (4x100) and the same centre bore (56.1 mm), these include: Honda WR-V, Honda Insight, Honda Fit, Honda Jazz. Offset, width and rim diameter still need checking for each vehicle.

Other Honda models

e:Ny1 5x114.3 e:Np1 5x114.3 e:Ns1 5x114.3 ZR-V 5x114.3 e 5x114.3 WR-V 4x100 NSX axe arrière 5x120 NSX axe avant 5x120 XR-V 5x114.3 CR-Z 5x114.3 Insight 4x100 Fit 4x100 All Honda →

Does a value look wrong, or is a version missing? Let us know, we check every report.