FRENES

Wheels from Audi A1 on Skoda Kamiq: compatible?

Yes, the hub is identical

Same 5x100 PCD and same 57.1 mm centre bore: wheels from Audi A1 bolt on and centre on Skoda Kamiq without rings. You still need to check the offset and tyres, detailed below.

Audi A12010–2018Skoda Kamiqfrom 2019
PCD5x1005x100
Centre bore57.1 mm57.1 mm
ThreadM14x1.50M14x1.50
Original wheels 6Jx15 ET29
≈6Jx15 ET40		 ≈6Jx15 ET38

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Audi A1 is compared with the one from Skoda Kamiq of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6Jx15 ET29 · 185/60R15 — Check on the car

    Compared with the original ≈6Jx15 ET38 on Skoda Kamiq: shock absorber side −9 mm, wheel arch side +9 mm, tyre diameter −5 % : fit it with the original tyre size of Skoda Kamiq (195/65R15), not that of Audi A1. Comparison for guidance only (estimated width). Check in detail

  • ≈6Jx15 ET40 · 185/65R15 — Fits like the original

    Compared with the original ≈6Jx15 ET38 on Skoda Kamiq: shock absorber side +2 mm, wheel arch side −2 mm, tyre diameter −2 % : fit it with the original tyre size of Skoda Kamiq (195/65R15), not that of Audi A1. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Skoda Kamiq (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Skoda Kamiq on Audi A1?