FRENES

Audi A1 PCD

2010–2018
VERIFIED
⌀57.1
PCD5x100
Centre bore57.1 mm
Offset (ET)ET29 to ET40
Fixing typeM14x1.50
Tightening torque120 Nm
Original tyres185/60R15, 185/65R15
Hub centric rings 57.1 mm → Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Audi A1

A Audi A1 (2010–2018) uses a 5x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x100 required. See all vehicles with 5x100.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET29 to ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/60R15, 185/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x100 57.1 mm 6Jx15 ET29 185/60R15
Version 2 5x100 57.1 mm — ET40 185/65R15

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Audi A1 without rings. Offset, width, diameter and caliper clearance still need checking.

Audi A1 Citycarver 2019–2022 Audi S1 2014–2018 Audi S1 Sportback 2014–2018 Audi TT 8N 2003–2007 Audi A2 1999–2006 Audi S3 1999–2003 Audi TT convertible 1.8T 1999–2007 Audi TT coupe 1.8T 1998–2006 Audi A3 8L 1996–2003 MG Astor from 2021 Skoda Fabia IV from 2021 Volkswagen Taigo from 2021 Skoda Kamiq GT from 2020 Skoda Kamiq from 2019 Skoda Scala from 2019 Volkswagen T-Cross from 2019

Will wheels from another vehicle fit your A1?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Audi A1?

A Audi A1 (2010–2018) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Audi A1 need a hub centric ring?

The centre bore (hub diameter) of a Audi A1 is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Audi A1?

The recorded original offset is ET29 to ET40 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Audi A1?

The specified tightening torque is 120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Audi A1?

With the same PCD (5x100) and the same centre bore (57.1 mm), these include: Audi A1 Citycarver, Audi S1, Audi S1 Sportback, Audi TT 8N. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.