FRENES

Wheels from Audi e-tron GT on Faw - Hongqi E-HS9: compatible?

Yes, the hub is identical

Same 5x130 PCD and same 71.6 mm centre bore: wheels from Audi e-tron GT bolt on and centre on Faw - Hongqi E-HS9 without rings. You still need to check the offset and tyres, detailed below.

Audi e-tron GTfrom 2021Faw - Hongqi E-HS9from 2020
PCD5x1305x130
Centre bore71.6 mm71.6 mm
ThreadM14x1.5M14x1.50
Original wheels 8Jx19 ET50
10Jx19 ET47
9Jx20 ET54
11Jx20 ET60
9.5Jx21 ET60
11.5Jx21 ET66		 ≈8.5Jx21 ET48

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Audi e-tron GT is compared with the one from Faw - Hongqi E-HS9 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 9.5Jx21 ET60 · 265/35R21 — Check on the car

    Compared with the original ≈8.5Jx21 ET48 on Faw - Hongqi E-HS9: shock absorber side +24.7 mm, wheel arch side +0.7 mm, tyre diameter −6.9 % : fit it with the original tyre size of Faw - Hongqi E-HS9 (265/45R21), not that of Audi e-tron GT. Comparison for guidance only (estimated width). Check in detail

  • 11.5Jx21 ET66 · 305/30R21 — Check on the car

    Compared with the original ≈8.5Jx21 ET48 on Faw - Hongqi E-HS9: shock absorber side +56.1 mm, wheel arch side +20.1 mm, tyre diameter −7.2 % : fit it with the original tyre size of Faw - Hongqi E-HS9 (265/45R21), not that of Audi e-tron GT. Comparison for guidance only (estimated width). Check in detail

  • 8Jx19 ET50 · 225/55R19

    Faw - Hongqi E-HS9 has no 19-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 10Jx19 ET47 · 275/45R19

    Faw - Hongqi E-HS9 has no 19-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 9Jx20 ET54 · 245/45R20

    Faw - Hongqi E-HS9 has no 20-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 11Jx20 ET60 · 285/40R20

    Faw - Hongqi E-HS9 has no 20-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Faw - Hongqi E-HS9 (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Faw - Hongqi E-HS9 on Audi e-tron GT?