FRENES

Faw - Hongqi E-HS9 PCD

from 2020
VERIFIED
⌀71.6
PCD5x130
Centre bore71.6 mm
Offset (ET)ET48
Fixing typeM14x1.50
Tightening torque160 Nm
Original tyres265/45R21
Hub centric rings 71.6 mm → Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Faw - Hongqi E-HS9

A Faw - Hongqi E-HS9 (from 2020) uses a 5x130 PCD and a centre bore of 71.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x130 required. See all vehicles with 5x130.
  • Centre bore: the wheel must have a centre bore of 71.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.6 mm.
  • Offset: the original is ET48. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 160 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 265/45R21. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 71.6 mm centre bore: wheels from these vehicles bolt on and centre on a Faw - Hongqi E-HS9 without rings. Offset, width, diameter and caliper clearance still need checking.

Bugatti Centodieci 2022–2022 Bugatti Mistral from 2022 Porsche Taycan from 2020 Bugatti Divo 2019–2021 Lamborghini Urus axe arrière from 2018 Lamborghini Urus axe avant from 2018 Bugatti Chiron from 2015 Porsche Panamera from 2009 Porsche 911 997 GT2 from 2007 Porsche 911 997 GT3 2006–2009 Porsche 911 997 GT3 RS 2006–2009 Porsche 911 997 Turbo 2006–2010 Audi Q7 2005–2015 Bentley Continental Flying Spur 2005–2019 Bugatti Veyron axe arrière 2005–2015 Bugatti Veyron axe avant 2005–2015

Will wheels from another vehicle fit your E-HS9?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Faw - Hongqi E-HS9?

A Faw - Hongqi E-HS9 (from 2020) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Faw - Hongqi E-HS9 need a hub centric ring?

The centre bore (hub diameter) of a Faw - Hongqi E-HS9 is 71.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Faw - Hongqi E-HS9?

The recorded original offset is ET48. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Faw - Hongqi E-HS9?

The specified tightening torque is 160 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Faw - Hongqi E-HS9?

With the same PCD (5x130) and the same centre bore (71.6 mm), these include: Bugatti Centodieci, Bugatti Mistral, Porsche Taycan, Bugatti Divo. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.