FRENES

Wheels from Dodge Durango on Jeep Gladiator: compatible?

Yes, with hub centric rings

Same 5x127 PCD, but the centre bore of the wheels from Dodge Durango (78.1 mm) is larger than the hub of Jeep Gladiator (71.5 mm): you need 4 hub centric rings 78.1 → 71.5.

Rings 78.1 → 71.5

Dodge Durango1998–2004Jeep Gladiatorfrom 2019
PCD6x114.3 / 5x139.7 / 5x1275x127
Centre bore78.1 mm71.5 mm
Thread-Ecrous - 14x1.50
Original wheels R
≈7.5Jx17 ET26
≈8.5Jx18 ET48		 ≈7.5Jx17 ET44

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Dodge Durango is compared with the one from Jeep Gladiator of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7.5Jx17 ET26 · 245/70R17 — Check on the car

    Compared with the original ≈7.5Jx17 ET44 on Jeep Gladiator: shock absorber side −18 mm, wheel arch side +18 mm, tyre diameter −3.1 % : fit it with the original tyre size of Jeep Gladiator (245/75R17), not that of Dodge Durango. Comparison for guidance only (estimated width). Check in detail

  • ≈8.5Jx18 ET48 · 265/60R18

    Jeep Gladiator has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Jeep Gladiator (Ecrous - 14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Jeep Gladiator on Dodge Durango?