⚠ This model comes with 6x114.3 or 5x139.7 or 5x127 depending on the year or version. Check on an original wheel or with a professional before buying anything.
A Dodge Durango (1998–2004) uses a 6x114.3 or 5x139.7 or 5x127 PCD and a centre bore of 71.6 or 78.1 or 71.5 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 71.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.6 mm.
Offset: the original is ET26 to ET48. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -, tightened to 150 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 245/70R17, 265/60R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
All recorded versions (3)
The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.
Version
PCD
Centre bore
Wheel
Offset
Tyre
Version 1
6x114.3
71.6 mm
—
ET30
—
Version 2
5x139.7
78.1 mm
—
ET26
245/70R17
Version 3
5x127
71.5 mm
—
ET48
265/60R18
Vehicles with the same PCD and centre bore
Same 6x114.3 PCD and same 71.6 mm centre bore: wheels from these vehicles bolt on and centre on a Dodge Durango without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 6x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 71.6 mm, and will not fit if it is smaller.
A Dodge Durango (1998–2004) can have a 6x114.3 or 5x139.7 or 5x127 PCD depending on the version: check on an original wheel.
Does a Dodge Durango need a hub centric ring?
The centre bore (hub diameter) of a Dodge Durango is 71.6 or 78.1 or 71.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Dodge Durango?
The recorded original offset is ET26 to ET48 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Dodge Durango?
The specified tightening torque is 150 Nm for - fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Dodge Durango?
With the same PCD (6x114.3) and the same centre bore (71.6 mm), these include: Dodge Dakota. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more