Yes, the hub is identical
Same 5x130 PCD and same 71.6 mm centre bore: wheels from Faw - Hongqi E-HS9 bolt on and centre on Porsche 911 992 Turbo without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Faw - Hongqi E-HS9 is compared with the one from Porsche 911 992 Turbo of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
≈8.5Jx21 ET48 · 265/45R21 — Fits like the original
Compared with the original 11.5Jx21 ET67 on Porsche 911 992 Turbo: shock absorber side −57.1 mm, wheel arch side −19.1 mm, tyre diameter +6.9 % : fit it with the original tyre size of Porsche 911 992 Turbo (315/30R21), not that of Faw - Hongqi E-HS9.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Porsche 911 992 Turbo (M14x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Porsche 911 992 Turbo on Faw - Hongqi E-HS9?