Porsche 911 992 Turbo PCD

from 2020

VERIFIED

PCD5x130

Centre bore71.6 mm

Offset (ET)ET41 to ET67

Fixing typeM14x1.5

Tightening torque160 Nm

Original tyres255/35R20, 315/30R21

Turbo à vis ; la Turbo S est à écrou central.

Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Porsche 911 992 Turbo

A Porsche 911 992 Turbo (from 2020) uses a 5x130 PCD and a centre bore of 71.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x130 required. See all vehicles with 5x130.
Centre bore: the wheel must have a centre bore of 71.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.6 mm.
Offset: the original is ET41 to ET67. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.5, tightened to 160 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 255/35R20, 315/30R21. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Porsche 911

Previous generation: Porsche 911 992 Carrera (from 2019) — same 5x130 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

911 930 Carrera 1975–1989 · 5x130 911 964 1989–1995 · 5x130 911 993 1995–1998 · 5x130 911 993 Turbo 1995–1998 · 5x130 911 996 1997–2004 · 5x130 911 996 Turbo 1999–2005 · 5x130 911 997 Carrera from 2004 · 5x130 911 997 Carrera 4 2004–2013 · 5x130 911 997 GT3 2006–2009 · 5x130 911 997 GT3 RS 2006–2009 · 5x130 911 997 Turbo 2006–2010 · 5x130 911 997 GT2 from 2007 · 5x130 911 997 GT2 RS from 2010 · Écrou central 911 991 Carrera 2011–2015 · 5x130 911 997 GTS from 2011 · Écrou central 911 991 Turbo S from 2013 · 5x130 911 992 Carrera from 2019 · 5x130 911 992 Turbo from 2020

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Avant	5x130	71.6 mm	9Jx20	ET41	255/35R20
Arrière	5x130	71.6 mm	11.5Jx21	ET67	315/30R21

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 71.6 mm centre bore: wheels from these vehicles bolt on and centre on a Porsche 911 992 Turbo without rings. Offset, width, diameter and caliper clearance still need checking.

Porsche Panamera 976 from 2024 Porsche Taycan from 2020 Porsche 911 992 Carrera from 2019 Porsche Cayenne 9YA from 2018 Porsche 911 991.2 Carrera 2016–2019 Porsche Panamera 971 2016–2023 Porsche 918 Spyder 2013–2015 Porsche Cayman 981 2013–2016 Porsche Boxster 981 2012–2016 Porsche 911 991 Carrera 2011–2015 Porsche Cayenne 958 2010–2018 Porsche Panamera 2009–2016 Porsche 911 997 GT2 from 2007 Porsche 911 997 GT3 2006–2009 Porsche 911 997 GT3 RS 2006–2009 Porsche 911 997 Turbo 2006–2010

Will wheels from another vehicle fit your 911 992 Turbo?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Porsche 911 992 Turbo?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Porsche 911 992 Carrera from 2019 Wheels from Porsche 918 Spyder 2013–2015 Wheels from Bugatti Centodieci 2022–2022 Wheels from Bugatti Mistral from 2022

Same PCD, different centre bore

These vehicles also use 5x130 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 71.6 mm, and will not fit if it is smaller.

Porsche Boxster 718 ⌀71.5 Porsche Cayman 718 ⌀71.5 Porsche 911 991 Turbo S ⌀71.5 Mercedes G-Classe W465 ⌀84.1 Renault Master 4 ⌀89.1 Maxus EV80 Plus ⌀78.1 Maxus EV80 Pro ⌀78.1 Bentley Bentayga ⌀71.5

Frequently asked questions

What is the PCD of a Porsche 911 992 Turbo?

A Porsche 911 992 Turbo (from 2020) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Porsche 911 992 Turbo need a hub centric ring?

The centre bore (hub diameter) of a Porsche 911 992 Turbo is 71.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Porsche 911 992 Turbo?

The recorded original offset is ET41 to ET67 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Porsche 911 992 Turbo?

The specified tightening torque is 160 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Porsche 911 992 Turbo?

With the same PCD (5x130) and the same centre bore (71.6 mm), these include: Porsche Panamera 976, Porsche Taycan, Porsche 911 992 Carrera, Porsche Cayenne 9YA. Offset, width and rim diameter still need checking for each vehicle.

Other Porsche models

Panamera 976 5x130 Taycan 5x130 Cayenne 9YA 5x130 Panamera 971 5x130 911 991.2 Carrera 5x130 Cayman 718 5x130 Boxster 718 5x130 Macan 5x112 918 Spyder 5x130 Cayman 981 5x130 All Porsche →

Does a value look wrong, or is a version missing? Let us know, we check every report.