Wheels from Ford Kuga III on Volvo V90 Cross Country: compatible?

Yes, the hub is identical

Same 5x108 PCD and same 63.4 mm centre bore: wheels from Ford Kuga III bolt on and centre on Volvo V90 Cross Country without rings. You still need to check the offset and tyres, detailed below.

Ford Kuga IIIfrom 2019Volvo V90 Cross Countryfrom 2016
PCD5x1085x108
Centre bore63.4 mm63.4 mm
ThreadM12x1.5M14x1.50
Original wheels 7Jx17 ET50
7.5Jx18 ET50
7.5Jx18 ET50.5

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Ford Kuga III is compared with the one from Volvo V90 Cross Country of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7.5Jx18 ET50 · 225/60R18 — Fits like the original

    Compared with the original 7.5Jx18 ET50.5 on Volvo V90 Cross Country: shock absorber side −0.5 mm, wheel arch side +0.5 mm, tyre diameter +1.6 %. Check in detail

  • 7Jx17 ET50 · 225/65R17

    Volvo V90 Cross Country has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Volvo V90 Cross Country (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Volvo V90 Cross Country on Ford Kuga III?