Wheels from Volvo V90 Cross Country on Ford Kuga III: compatible?

Yes, the hub is identical

Same 5x108 PCD and same 63.4 mm centre bore: wheels from Volvo V90 Cross Country bolt on and centre on Ford Kuga III without rings. You still need to check the offset and tyres, detailed below.

Volvo V90 Cross Countryfrom 2016Ford Kuga IIIfrom 2019
PCD5x1085x108
Centre bore63.4 mm63.4 mm
ThreadM14x1.50M12x1.5
Original wheels 7.5Jx18 ET50.5 7Jx17 ET50
7.5Jx18 ET50

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Volvo V90 Cross Country is compared with the one from Ford Kuga III of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7.5Jx18 ET50.5 · 235/55R18 — Fits like the original

    Compared with the original 7.5Jx18 ET50 on Ford Kuga III: shock absorber side +0.5 mm, wheel arch side −0.5 mm, tyre diameter −1.6 %. Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Ford Kuga III (M12x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Ford Kuga III on Volvo V90 Cross Country?