Yes, the hub is identical
Same 5x108 PCD and same 63.4 mm centre bore: wheels from Ford Puma (J2K) bolt on and centre on Land Rover Evoque without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Ford Puma (J2K) is compared with the one from Land Rover Evoque of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
7Jx17 ET47.5 · 215/55R17 — Fits like the original
Compared with the original 7Jx17 ET45 on Land Rover Evoque: shock absorber side +2.5 mm, wheel arch side −2.5 mm, tyre diameter −7.7 % : fit it with the original tyre size of Land Rover Evoque (225/65R17), not that of Ford Puma (J2K).
Check in detail
- ?
6.5Jx16 ET45 · 205/65R16
Land Rover Evoque has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.
- ?
8Jx19 ET52.5 · 225/40R19
Land Rover Evoque has no 19-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Land Rover Evoque (Ecrous - 14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Land Rover Evoque on Ford Puma (J2K)?