Land Rover Evoque PCD

2011–2018
VERIFIED
⌀63.4
Centre bore63.4 mm
Offset (ET)ET45
Fixing typeEcrous - 14x1.50
Tightening torque133 Nm
Original tyres225/65R17

Fitting wheels on a Land Rover Evoque

A Land Rover Evoque (2011–2018) uses a 5x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
  • Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 14x1.50, tightened to 133 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Land Rover Evoque without rings. Offset, width, diameter and caliper clearance still need checking.

Will wheels from another vehicle fit your Evoque?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Land Rover Evoque?

A Land Rover Evoque (2011–2018) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Land Rover Evoque need a hub centric ring?

The centre bore (hub diameter) of a Land Rover Evoque is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Land Rover Evoque?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Land Rover Evoque?

The specified tightening torque is 133 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Land Rover Evoque?

With the same PCD (5x108) and the same centre bore (63.4 mm), these include: Land Rover Range Rover Velar, Land Rover Freelander II, Zeekr 9X, Lynk&Co 02. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.