Yes, the hub is identical
Same 5x108 PCD and same 63.4 mm centre bore: wheels from Volvo C40 bolt on and centre on Land Rover Evoque without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Volvo C40 is compared with the one from Land Rover Evoque of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈7.5Jx17 ET50.5 · 235/60R17 — Check on the car
Compared with the original 7Jx17 ET45 on Land Rover Evoque: shock absorber side +11.9 mm, wheel arch side +0.9 mm, tyre diameter −1.4 %.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Land Rover Evoque (Ecrous - 14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Land Rover Evoque on Volvo C40?