FRENES

Wheels from Holden Combo on Peugeot 807: compatible?

Yes, the hub is identical

Same 5x98 PCD and same 58.1 mm centre bore: wheels from Holden Combo bolt on and centre on Peugeot 807 without rings. You still need to check the offset and tyres, detailed below.

Holden Combofrom 2011Peugeot 807from 2002
PCD5x985x98
Centre bore58.1 mm58.1 mm
ThreadM12x1.25M14x1.50
Original wheels ≈6Jx15 ET39 ≈6.5Jx15 ET31

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Holden Combo is compared with the one from Peugeot 807 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6Jx15 ET39 · 185/65R15 — Fits like the original

    Compared with the original ≈6.5Jx15 ET31 on Peugeot 807: shock absorber side +1.6 mm, wheel arch side −14.4 mm, tyre diameter −4 % : fit it with the original tyre size of Peugeot 807 (205/65R15), not that of Holden Combo. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Peugeot 807 (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Peugeot 807 on Holden Combo?