Holden Combo PCD

from 2011

VERIFIED

Centre bore58.1 mm

Offset (ET)ET39

Fixing typeM12x1.25

Original tyres185/65R15

Hub centric rings 58.1 mm → Wheel spacers 5x98(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Holden Combo

A Holden Combo (from 2011) uses a 5x98 PCD and a centre bore of 58.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x98 required. See all vehicles with 5x98.
Centre bore: the wheel must have a centre bore of 58.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 58.1 mm.
Offset: the original is ET39. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 185/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x98 PCD and same 58.1 mm centre bore: wheels from these vehicles bolt on and centre on a Holden Combo without rings. Offset, width, diameter and caliper clearance still need checking.

Fiat e-Doblo from 2022 Alfa Romeo 4C 2013–2020 Fiat 500L Trekking from 2013 RAM Promaster City from 2013 Fiat 500L from 2012 Fiat Doblo Maxi 2010–2022 Alfa Romeo GT 2003–2010 Lancia Phedra 2002–2010 Peugeot 807 from 2002 Alfa Romeo 147 2001–2010 Fiat Doblo 2001–2005 Alfa Romeo 156 1997–2006 Citroen Jumpy 1996–2006 Fiat Scudo 1996–2004 Peugeot Expert 1996–2006 Alfa Romeo GTV 1995–2006

Will wheels from another vehicle fit your Combo?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Holden Combo?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Fiat 500L from 2012 Wheels from Peugeot 807 from 2002 Wheels from Alfa Romeo 147 2001–2010 Wheels from Fiat Doblo 2001–2005

Same PCD, different centre bore

These vehicles also use 5x98 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 58.1 mm, and will not fit if it is smaller.

Citroen C8 ⌀65.1 Alfa Romeo 75 5 trou, V6 ⌀58.6

Frequently asked questions

What is the PCD of a Holden Combo?

A Holden Combo (from 2011) has a PCD of 5x98: 5 studs or bolts spaced around a circle 98 mm in diameter.

Does a Holden Combo need a hub centric ring?

The centre bore (hub diameter) of a Holden Combo is 58.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Holden Combo?

The recorded original offset is ET39. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Holden Combo?

With the same PCD (5x98) and the same centre bore (58.1 mm), these include: Fiat e-Doblo, Alfa Romeo 4C, Fiat 500L Trekking, RAM Promaster City. Offset, width and rim diameter still need checking for each vehicle.

Other Holden models

Commodore VF 5x120 Cruze Wagon Diesel 5x115 Cruze Wagon Essence 5x105 Volt 5x115 Barina 4 trou 4x100 Barina 5 trou 5x105 Barina Spark 4x100 Colorado 6x139.7 Cruze Diesel 5x115 Cruze Essence 5x105 Captiva 5x115 Commodore VE 5x120 All Holden →

Does a value look wrong, or is a version missing? Let us know, we check every report.