FRENES

Wheels from Honda Civic Type R FK8 on Acura MDX: compatible?

Yes, the hub is identical

Same 5x120 PCD and same 64.1 mm centre bore: wheels from Honda Civic Type R FK8 bolt on and centre on Acura MDX without rings. You still need to check the offset and tyres, detailed below.

Honda Civic Type R FK82017–2022Acura MDXfrom 2017
PCD5x1205x120
Centre bore64.1 mm64.1 mm
ThreadM14x1.5Ecrous - 14x1.50
Original wheels 8Jx18 ET55
8.5Jx20 ET60		 ≈7.5Jx18 ET55

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Honda Civic Type R FK8 is compared with the one from Acura MDX of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 8Jx18 ET55 · 235/40R18 — Check on the car

    Compared with the original ≈7.5Jx18 ET55 on Acura MDX: shock absorber side +6.3 mm, wheel arch side +6.3 mm, tyre diameter −14.1 % : fit it with the original tyre size of Acura MDX (245/60R18), not that of Honda Civic Type R FK8. Comparison for guidance only (estimated width). Check in detail

  • 8.5Jx20 ET60 · 245/30R20

    Acura MDX has no 20-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Acura MDX (Ecrous - 14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Acura MDX on Honda Civic Type R FK8?