FRENES

Wheels from Hyundai i20 III on Mazda MX-5 ND: compatible?

Yes, the hub is identical

Same 4x100 PCD and same 54.1 mm centre bore: wheels from Hyundai i20 III bolt on and centre on Mazda MX-5 ND without rings. You still need to check the offset and tyres, detailed below.

Hyundai i20 IIIfrom 2020Mazda MX-5 NDfrom 2015
PCD4x1004x100
Centre bore54.1 mm54.1 mm
ThreadM12x1.5M12x1.5
Original wheels 6Jx15 ET47
6Jx16 ET50		 6.5Jx16 ET45
7Jx17 ET45

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Hyundai i20 III is compared with the one from Mazda MX-5 ND of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6Jx16 ET50 · 195/55R16 — Fits like the original

    Compared with the original 6.5Jx16 ET45 on Mazda MX-5 ND: shock absorber side −1.4 mm, wheel arch side −11.4 mm, tyre diameter +3.2 % : fit it with the original tyre size of Mazda MX-5 ND (195/50R16), not that of Hyundai i20 III. Check in detail

  • 6Jx15 ET47 · 185/65R15

    Mazda MX-5 ND has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Mazda MX-5 ND (M12x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Mazda MX-5 ND on Hyundai i20 III?