FRENES

Hyundai i20 III PCD

from 2020
VERIFIED
⌀54.1
PCD4x100
Centre bore54.1 mm
Offset (ET)ET47 to ET50
Fixing typeM12x1.5
Original tyres185/65R15, 195/55R16
Hors i20 N.
Hub centric rings 54.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai i20 III

A Hyundai i20 III (from 2020) uses a 4x100 PCD and a centre bore of 54.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 54.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 54.1 mm.
  • Offset: the original is ET47 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/65R15, 195/55R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 54.1 mm 6Jx15 ET47 185/65R15
Version 2 4x100 54.1 mm 6Jx16 ET50 195/55R16

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 54.1 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai i20 III without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai Inster from 2024 Hyundai Bayon from 2021 Hyundai i10 III from 2019 Hyundai i10 I 2008–2013 Hyundai i20 I 2008–2015 Hyundai Getz Cross 2007–2008 Hyundai Getz 2002–2011 Hyundai Atos 1997–2000 Hyundai Accent 1994–1999 Hyundai Excel 1994–1999 Toyota Aygo X 2021–2025 Kia Picanto III from 2017 Kia Stonic from 2017 Fiat 124 Spider from 2015 Mazda Mazda2 from 2015 Suzuki Alivio 2015–2021

Will wheels from another vehicle fit your i20 III?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Hyundai i20 III?

A Hyundai i20 III (from 2020) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Hyundai i20 III need a hub centric ring?

The centre bore (hub diameter) of a Hyundai i20 III is 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai i20 III?

The recorded original offset is ET47 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Hyundai i20 III?

With the same PCD (4x100) and the same centre bore (54.1 mm), these include: Hyundai Inster, Hyundai Bayon, Hyundai i10 III, Hyundai i10 I. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.