FRENES

Wheels from Hyundai Santa Fe IV on Hyundai Kona II: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from Hyundai Santa Fe IV bolt on and centre on Hyundai Kona II without rings. You still need to check the offset and tyres, detailed below.

Hyundai Santa Fe IV2018–2023Hyundai Kona IIfrom 2023
PCD5x114.35x114.3
Centre bore67.1 mm67.1 mm
ThreadM12x1.5M12x1.5
Original wheels 7Jx17 ET47
7.5Jx18 ET49.5
8Jx19 ET51		 7Jx17 ET50
7.5Jx19 ET52

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Hyundai Santa Fe IV is compared with the one from Hyundai Kona II of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7Jx17 ET47 · 235/65R17 — Fits like the original

    Compared with the original 7Jx17 ET50 on Hyundai Kona II: shock absorber side −3 mm, wheel arch side +3 mm, tyre diameter +6.9 % : fit it with the original tyre size of Hyundai Kona II (215/60R17), not that of Hyundai Santa Fe IV. Check in detail

  • 8Jx19 ET51 · 235/55R19 — Check on the car

    Compared with the original 7.5Jx19 ET52 on Hyundai Kona II: shock absorber side +5.3 mm, wheel arch side +7.3 mm, tyre diameter +6.8 % : fit it with the original tyre size of Hyundai Kona II (235/45R19), not that of Hyundai Santa Fe IV. Check in detail

  • 7.5Jx18 ET49.5 · 235/60R18

    Hyundai Kona II has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Hyundai Kona II (M12x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Hyundai Kona II on Hyundai Santa Fe IV?