FRENES

Hyundai Kona II PCD

from 2023
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Offset (ET)ET50 to ET52
Fixing typeM12x1.5
Original tyres215/60R17, 235/45R19
Écrous
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai Kona II

A Hyundai Kona II (from 2023) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET50 to ET52. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/60R17, 235/45R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Hyundai Kona

Previous generation: Hyundai Kona (2017–2022) — same 5x114.3 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Kona 2017–2022 · 5x114.3 Kona II from 2023

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 67.1 mm 7Jx17 ET50 215/60R17
Version 2 5x114.3 67.1 mm 7.5Jx19 ET52 235/45R19

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai Kona II without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai Santa Fe V from 2024 Hyundai IONIQ 6 from 2022 Hyundai Stargazer from 2022 Hyundai i20 N 2021–2024 Hyundai IONIQ 5 from 2021 Hyundai IONIQ 5 N from 2021 Hyundai Tucson IV from 2020 Hyundai Nexo from 2018 Hyundai Santa Fe IV 2018–2023 Hyundai i30 III from 2017 Hyundai i30 N from 2017 Hyundai Kona 2017–2022 Hyundai Ioniq 2016–2023 Hyundai Tucson III 2015–2020 Hyundai i30 II 2012–2017 Hyundai i40 from 2011

Will wheels from another vehicle fit your Kona II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Hyundai Kona II?

A Hyundai Kona II (from 2023) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Hyundai Kona II need a hub centric ring?

The centre bore (hub diameter) of a Hyundai Kona II is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai Kona II?

The recorded original offset is ET50 to ET52 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Hyundai Kona II?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Hyundai Santa Fe V, Hyundai IONIQ 6, Hyundai Stargazer, Hyundai i20 N. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.