FRENES

Hyundai Santa Fe IV PCD

2018–2023
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Offset (ET)ET47 to ET51
Fixing typeM12x1.5
Original tyres235/65R17, 235/60R18, 235/55R19
TM, restylage 2020
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai Santa Fe IV

A Hyundai Santa Fe IV (2018–2023) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET47 to ET51. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/65R17, 235/60R18, 235/55R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Hyundai Santa Fe

Previous generation: Hyundai Santa Fe (2001–2006) — same 5x114.3 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter. Next generation: Hyundai Santa Fe V (from 2024) — same 5x114.3 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Santa Fe 2001–2006 · 5x114.3 Santa Fe IV 2018–2023 Santa Fe V from 2024 · 5x114.3

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 67.1 mm 7Jx17 ET47 235/65R17
Version 2 5x114.3 67.1 mm 7.5Jx18 ET49.5 235/60R18
Version 3 5x114.3 67.1 mm 8Jx19 ET51 235/55R19

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai Santa Fe IV without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai Santa Fe V from 2024 Hyundai Kona II from 2023 Hyundai IONIQ 6 from 2022 Hyundai Stargazer from 2022 Hyundai i20 N 2021–2024 Hyundai IONIQ 5 from 2021 Hyundai IONIQ 5 N from 2021 Hyundai Tucson IV from 2020 Hyundai Nexo from 2018 Hyundai i30 III from 2017 Hyundai i30 N from 2017 Hyundai Kona 2017–2022 Hyundai Ioniq 2016–2023 Hyundai Tucson III 2015–2020 Hyundai i30 II 2012–2017 Hyundai i40 from 2011

Will wheels from another vehicle fit your Santa Fe IV?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Hyundai Santa Fe IV?

A Hyundai Santa Fe IV (2018–2023) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Hyundai Santa Fe IV need a hub centric ring?

The centre bore (hub diameter) of a Hyundai Santa Fe IV is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai Santa Fe IV?

The recorded original offset is ET47 to ET51 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Hyundai Santa Fe IV?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Hyundai Santa Fe V, Hyundai Kona II, Hyundai IONIQ 6, Hyundai Stargazer. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.