FRENES

Wheels from Jeep Compass on DS DS 7: compatible?

Yes, with hub centric rings

Same 5x108 PCD, but the centre bore of the wheels from Jeep Compass (67.1 mm) is larger than the hub of DS DS 7 (65.1 mm): you need 4 hub centric rings 67.1 → 65.1.

Rings 67.1 → 65.1

Jeep Compass2006–2017DS DS 7from 2023
PCD5x114.3 / 5x110 / 5x1085x108
Centre bore67.1 mm65.1 mm
ThreadEcrous - 12x1.50M12x1.25
Original wheels R
≈7Jx16 ET40
≈7Jx17 ET48		 ≈7Jx17 ET44

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Jeep Compass is compared with the one from DS DS 7 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7Jx17 ET48 · 215/65R17 — Check on the car

    Compared with the original ≈7Jx17 ET44 on DS DS 7: shock absorber side +4 mm, wheel arch side −4 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

  • ≈7Jx16 ET40 · 215/65R16

    DS DS 7 has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of DS DS 7 (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from DS DS 7 on Jeep Compass?