⚠ This model comes with 5x114.3 or 5x110 or 5x108 depending on the year or version. Check on an original wheel or with a professional before buying anything.
A Jeep Compass (2006–2017) uses a 5x114.3 or 5x110 or 5x108 PCD and a centre bore of 67.1 or 65.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
Offset: the original is ET39 to ET48. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 135 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 215/65R16, 215/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
All recorded versions (3)
The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.
Version
PCD
Centre bore
Wheel
Offset
Tyre
Version 1
5x114.3
67.1 mm
—
ET39
—
Version 2
5x110
65.1 mm
—
ET40
215/65R16
Version 3
5x108
65.1 mm
—
ET48
215/65R17
Vehicles with the same PCD and centre bore
Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Jeep Compass without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 67.1 mm, and will not fit if it is smaller.
A Jeep Compass (2006–2017) can have a 5x114.3 or 5x110 or 5x108 PCD depending on the version: check on an original wheel.
Does a Jeep Compass need a hub centric ring?
The centre bore (hub diameter) of a Jeep Compass is 67.1 or 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Jeep Compass?
The recorded original offset is ET39 to ET48 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Jeep Compass?
The specified tightening torque is 135 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Jeep Compass?
With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Jeep Patriot, Kia EV3, Mazda CX-80, Mazda Mazda6e. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more