DS DS 7 PCD

from 2023

VERIFIED

Centre bore65.1 mm

Offset (ET)ET44

Fixing typeM12x1.25

Tightening torque115 Nm

Original tyres215/65R17

Hub centric rings 65.1 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a DS DS 7

A DS DS 7 (from 2023) uses a 5x108 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x108 required. See all vehicles with 5x108.
Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
Offset: the original is ET44. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.25, tightened to 115 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 215/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a DS DS 7 without rings. Offset, width, diameter and caliper clearance still need checking.

DS DS 9 2020–2026 DS DS 7 Crossback 2017–2023 DS DS 3 2015–2019 DS DS 4 2015–2019 Peugeot 408 from 2022 Opel Zafira Life from 2019 Citroen Berlingo III from 2018 Peugeot Rifter from 2018 Citroen C5 Aircross from 2017 Opel Grandland X from 2017 Peugeot 5008 II 2017–2024 Citroen SpaceTourer 2016–2024 Peugeot 3008 II 2016–2023 Peugeot Traveller from 2016 Peugeot 308 SW 2014–2022 Peugeot RCZ-R 2014–2016

Will wheels from another vehicle fit your DS 7?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a DS DS 7?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from DS DS 7 Crossback 2017–2023 Wheels from DS DS 3 2015–2019 Wheels from DS DS 4 2015–2019 Wheels from Peugeot 408 from 2022

Same PCD, different centre bore

These vehicles also use 5x108 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 65.1 mm, and will not fit if it is smaller.

Zeekr 9X ⌀63.4 Lynk&Co 02 ⌀63.4 Polestar Polestar 4 ⌀63.4 Volvo EC40 ⌀63.4 Volvo EX40 axe arrière ⌀63.4 Volvo EX40 axe avant ⌀63.4 Zeekr 7X ⌀63.4 Ford Tourneo Courier ⌀63.4

Frequently asked questions

What is the PCD of a DS DS 7?

A DS DS 7 (from 2023) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a DS DS 7 need a hub centric ring?

The centre bore (hub diameter) of a DS DS 7 is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a DS DS 7?

The recorded original offset is ET44. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a DS DS 7?

The specified tightening torque is 115 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a DS DS 7?

With the same PCD (5x108) and the same centre bore (65.1 mm), these include: DS DS 9, DS DS 7 Crossback, DS DS 3, DS DS 4. Offset, width and rim diameter still need checking for each vehicle.

Other DS models

DS 9 5x108 DS 3 Crossback 4x108 DS 7 Crossback 5x108 DS 3 4x108 DS 4 5x108 DS 5 4x108 DS 6 4x108 All DS →

Does a value look wrong, or is a version missing? Let us know, we check every report.