FRENES

Wheels from Jeep Wagoneer on RAM RAM 1500: compatible?

Yes, with hub centric rings

Same 6x139.7 PCD, but the centre bore of the wheels from Jeep Wagoneer (89.1 mm) is larger than the hub of RAM RAM 1500 (77.8 mm): you need 4 hub centric rings 89.1 → 77.8.

Rings 89.1 → 77.8

Jeep Wagoneer1978–1984RAM RAM 15002011–2018
PCD6x139.7 / 5x114.35x139.7 / 6x139.7
Centre bore89.1 mm77.8 mm
ThreadEcrous - 1/2 - 20 UNEcrous - 14x1.50
Original wheels R
≈7Jx15 ET10
≈8.5Jx18 ET19		 ≈8.5Jx17 ET26
≈8.5Jx18 ET26

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Jeep Wagoneer is compared with the one from RAM RAM 1500 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈8.5Jx18 ET19 · 275/65R18 — Check on the car

    Compared with the original ≈8.5Jx18 ET26 on RAM RAM 1500: shock absorber side −7 mm, wheel arch side +7 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

  • ≈7Jx15 ET10 · 225/75R15

    RAM RAM 1500 has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of RAM RAM 1500 (Ecrous - 14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from RAM RAM 1500 on Jeep Wagoneer?