Same 5x108 PCD and same 63.4 mm centre bore: wheels from Land Rover Evoque bolt on and centre on Ford Kuga III without rings. You still need to check the offset and tyres, detailed below.
| Land Rover Evoque2011–2018 | Ford Kuga IIIfrom 2019 | |
|---|---|---|
| PCD | 5x108 | 5x108 |
| Centre bore | 63.4 mm | 63.4 mm |
| Thread | Ecrous - 14x1.50 | M12x1.5 |
| Original wheels | 7Jx17 ET45 | 7Jx17 ET50 7.5Jx18 ET50 |
≈: width estimated from the original tyre size.
Each original wheel from Land Rover Evoque is compared with the one from Ford Kuga III of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 7Jx17 ET50 on Ford Kuga III: shock absorber side −5 mm, wheel arch side +5 mm, tyre diameter +0 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Ford Kuga III (M12x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Ford Kuga III on Land Rover Evoque?