FRENES

Wheels from Mercedes T-Classe W420 on Dacia Duster III: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Mercedes T-Classe W420 bolt on and centre on Dacia Duster III without rings. You still need to check the offset and tyres, detailed below.

Mercedes T-Classe W420from 2022Dacia Duster IIIfrom 2024
PCD5x114.35x114.3
Centre bore66.1 mm66.1 mm
ThreadM12x1.5M12x1.5
Original wheels 6Jx16 ET38
6.5Jx16 ET40
7Jx17 ET43		 6.5Jx16 ET32
6.5Jx17 ET32
6.5Jx17 ET36

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Mercedes T-Classe W420 is compared with the one from Dacia Duster III of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6Jx16 ET38 · 205/60R16 — Fits like the original

    Compared with the original 6.5Jx16 ET32 on Dacia Duster III: shock absorber side 0 mm, wheel arch side −12.4 mm, tyre diameter −7.8 % : fit it with the original tyre size of Dacia Duster III (215/70R16), not that of Mercedes T-Classe W420. Check in detail

  • 6.5Jx16 ET40 · 205/60R16 — Check on the car

    Compared with the original 6.5Jx16 ET32 on Dacia Duster III: shock absorber side +8 mm, wheel arch side −8 mm, tyre diameter −7.8 % : fit it with the original tyre size of Dacia Duster III (215/70R16), not that of Mercedes T-Classe W420. Check in detail

  • 7Jx17 ET43 · 205/55R17 — Risk of rubbing

    Compared with the original 6.5Jx17 ET32 on Dacia Duster III: shock absorber side +17.4 mm, wheel arch side −4.7 mm, tyre diameter −7.6 % : fit it with the original tyre size of Dacia Duster III (215/65R17), not that of Mercedes T-Classe W420. Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Dacia Duster III (M12x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Dacia Duster III on Mercedes T-Classe W420?