FRENES

Mercedes T-Classe W420 PCD

from 2022
VERIFIED
⌀66.1
PCD5x114.3
Centre bore66.1 mm
Offset (ET)ET38 to ET43
Fixing typeM12x1.5
Original tyres205/60R16, 205/55R17
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mercedes T-Classe W420

A Mercedes T-Classe W420 (from 2022) uses a 5x114.3 PCD and a centre bore of 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 66.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.1 mm.
  • Offset: the original is ET38 to ET43. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/60R16, 205/55R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 66.1 mm 6.5Jx16 ET40 205/60R16
Version 2 5x114.3 66.1 mm 6Jx16 ET38 205/60R16
Version 3 5x114.3 66.1 mm 7Jx17 ET43 205/55R17

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mercedes T-Classe W420 without rings. Offset, width, diameter and caliper clearance still need checking.

Mercedes EQT from 2022 Mercedes Citan W420 from 2021 Mercedes Citan from 2012 Dacia Bigster from 2025 Mitsubishi Outlander IV from 2025 Renault 4 E-Tech from 2025 Dacia Duster III from 2024 Renault 5 E-Tech from 2024 Renault Grand Kangoo from 2024 Renault Rafale from 2024 Renault Symbioz from 2024 Renault Espace 6 from 2023 Renault Scenic E-Tech from 2023 Nissan Qashqai J12 from 2022 Nissan Townstar from 2022 Renault Austral from 2022

Will wheels from another vehicle fit your T-Classe W420?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mercedes T-Classe W420?

A Mercedes T-Classe W420 (from 2022) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Mercedes T-Classe W420 need a hub centric ring?

The centre bore (hub diameter) of a Mercedes T-Classe W420 is 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mercedes T-Classe W420?

The recorded original offset is ET38 to ET43 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Mercedes T-Classe W420?

With the same PCD (5x114.3) and the same centre bore (66.1 mm), these include: Mercedes EQT, Mercedes Citan W420, Mercedes Citan, Dacia Bigster. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.