FRENES

Wheels from MG ZS on Skoda Kamiq GT: compatible?

Yes, the hub is identical

Same 5x100 PCD and same 57.1 mm centre bore: wheels from MG ZS bolt on and centre on Skoda Kamiq GT without rings. You still need to check the offset and tyres, detailed below.

MG ZS2001–2005Skoda Kamiq GTfrom 2020
PCD4x100 / 5x1005x100
Centre bore57.1 mm57.1 mm
ThreadEcrous - 12x1.50M14x1.50
Original wheels ≈6Jx15 ET41
≈6.5Jx16 ET45		 ≈6.5Jx16 ET34

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from MG ZS is compared with the one from Skoda Kamiq GT of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6.5Jx16 ET45 · 205/50R16 — Check on the car

    Compared with the original ≈6.5Jx16 ET34 on Skoda Kamiq GT: shock absorber side +11 mm, wheel arch side −11 mm, tyre diameter −6.3 % : fit it with the original tyre size of Skoda Kamiq GT (205/60R16), not that of MG ZS. Comparison for guidance only (estimated width). Check in detail

  • ≈6Jx15 ET41 · 195/65R15

    Skoda Kamiq GT has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Skoda Kamiq GT (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Skoda Kamiq GT on MG ZS?