FRENES

MG ZS PCD

2001–2005
VERIFIED
⌀56.1
PCD4x100 or 5x100
Centre bore56.1 or 57.1 mm
Offset (ET)ET41 to ET45
Fixing typeEcrous - 12x1.50
Tightening torque110 Nm
Original tyres205/50R16, 195/65R15
⚠ This model comes with 4x100 or 5x100 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 56.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a MG ZS

A MG ZS (2001–2005) uses a 4x100 or 5x100 PCD and a centre bore of 56.1 or 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 or 5x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
  • Offset: the original is ET41 to ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/50R16, 195/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 56.1 mm — ET45 205/50R16
Version 2 5x100 57.1 mm — ET41 195/65R15

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a MG ZS without rings. Offset, width, diameter and caliper clearance still need checking.

MG MG3 from 2017 MG ZR 2001–2006 Nissan Dayz from 2023 Honda WR-V from 2017 Mini Coupe 2011–2015 Citroen C-Zero from 2010 Mitsubishi i-MiEV from 2010 Honda Insight 2009–2014 Peugeot iON from 2009 Honda Fit from 2008 Mini Cooper Clubman from 2007 Mini Cooper Clubman S from 2007 Proton Persona 2007–2010 Rover CityRover 2004–2006 Rover Streetwise 2004–2006 Honda Jazz 2002–2008

Will wheels from another vehicle fit your ZS?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a MG ZS?

A MG ZS (2001–2005) can have a 4x100 or 5x100 PCD depending on the version: check on an original wheel.

Does a MG ZS need a hub centric ring?

The centre bore (hub diameter) of a MG ZS is 56.1 or 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a MG ZS?

The recorded original offset is ET41 to ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a MG ZS?

The specified tightening torque is 110 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a MG ZS?

With the same PCD (4x100) and the same centre bore (56.1 mm), these include: MG MG3, MG ZR, Nissan Dayz, Honda WR-V. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.