FRENES

Wheels from Nissan Juke II on Infiniti QX50: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Nissan Juke II bolt on and centre on Infiniti QX50 without rings. You still need to check the offset and tyres, detailed below.

Nissan Juke IIfrom 2019Infiniti QX50from 2018
PCD5x114.35x114.3
Centre bore66.1 mm66.1 mm
ThreadM12x1.5Ecrous - 12x1.25
Original wheels 6.5Jx16 ET35
7Jx17 ET35
7.5Jx19 ET35		 ≈7.5Jx19 ET44

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Nissan Juke II is compared with the one from Infiniti QX50 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7.5Jx19 ET35 · 225/45R19 — Check on the car

    Compared with the original ≈7.5Jx19 ET44 on Infiniti QX50: shock absorber side −9 mm, wheel arch side +9 mm, tyre diameter −7.6 % : fit it with the original tyre size of Infiniti QX50 (235/55R19), not that of Nissan Juke II. Comparison for guidance only (estimated width). Check in detail

  • 6.5Jx16 ET35 · 215/65R16

    Infiniti QX50 has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 7Jx17 ET35 · 215/60R17

    Infiniti QX50 has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Infiniti QX50 (Ecrous - 12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Infiniti QX50 on Nissan Juke II?