FRENES

Wheels from Renault Megane 4 on Infiniti QX50: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Renault Megane 4 bolt on and centre on Infiniti QX50 without rings. You still need to check the offset and tyres, detailed below.

Renault Megane 42016–2023Infiniti QX50from 2018
PCD5x114.35x114.3
Centre bore66.1 mm66.1 mm
ThreadM12x1.5Ecrous - 12x1.25
Original wheels 6Jx15 ET35
6.5Jx16 ET41
6.5Jx16 ET41
7Jx17 ET43
7Jx17 ET43
8Jx18 ET48
8.5Jx19 ET54		 ≈7.5Jx19 ET44

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Renault Megane 4 is compared with the one from Infiniti QX50 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 8.5Jx19 ET54 · 245/35R19 — Check on the car

    Compared with the original ≈7.5Jx19 ET44 on Infiniti QX50: shock absorber side +22.7 mm, wheel arch side +2.7 mm, tyre diameter −11.7 % : fit it with the original tyre size of Infiniti QX50 (235/55R19), not that of Renault Megane 4. Comparison for guidance only (estimated width). Check in detail

  • 6Jx15 ET35 · 195/65R15

    Infiniti QX50 has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 6.5Jx16 ET41 · 205/55R16

    Infiniti QX50 has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 6.5Jx16 ET41 · 205/60R16

    Infiniti QX50 has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 7Jx17 ET43 · 205/50R17

    Infiniti QX50 has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 7Jx17 ET43 · 225/45R17

    Infiniti QX50 has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 8Jx18 ET48 · 235/40R18

    Infiniti QX50 has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Infiniti QX50 (Ecrous - 12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Infiniti QX50 on Renault Megane 4?