Yes, the hub is identical
Same 5x139.7 PCD and same 108.1 mm centre bore: wheels from Suzuki Jimny JB74 bolt on and centre on Daihatsu Feroza without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Suzuki Jimny JB74 is compared with the one from Daihatsu Feroza of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
5.5Jx15 ET5 · 195/80R15 — Fits like the original
Compared with the original ≈6.5Jx15 ET19 on Daihatsu Feroza: shock absorber side −26.7 mm, wheel arch side +1.3 mm, tyre diameter −2.3 % : fit it with the original tyre size of Daihatsu Feroza (205/80R15), not that of Suzuki Jimny JB74.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Daihatsu Feroza (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Daihatsu Feroza on Suzuki Jimny JB74?