Daihatsu Feroza PCD

1987–1998

VERIFIED

Centre bore108.1 mm

Offset (ET)ET19

Fixing typeEcrous - 12x1.50

Original tyres205/80R15

Hub centric rings 108.1 mm → Wheel spacers 5x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Daihatsu Feroza

A Daihatsu Feroza (1987–1998) uses a 5x139.7 PCD and a centre bore of 108.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x139.7 required. See all vehicles with 5x139.7.
Centre bore: the wheel must have a centre bore of 108.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 108.1 mm.
Offset: the original is ET19. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 205/80R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x139.7 PCD and same 108.1 mm centre bore: wheels from these vehicles bolt on and centre on a Daihatsu Feroza without rings. Offset, width, diameter and caliper clearance still need checking.

Chevrolet Tracker 1999–2009 Suzuki Grand Vitara 1998–2005 Suzuki Vitara 1988–1998

Will wheels from another vehicle fit your Feroza?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Daihatsu Feroza?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Chevrolet Tracker 1999–2009 Wheels from Suzuki Grand Vitara 1998–2005

Same PCD, different centre bore

These vehicles also use 5x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 108.1 mm, and will not fit if it is smaller.

Daihatsu Rocky ⌀108 Lada Niva Travel ⌀98.1 RAM RAM 1500 ⌀77.8 Chrysler Aspen ⌀78.1 Kia Sorento ⌀95.1 Dodge Durango ⌀78.1 Suzuki Gand Vitara ⌀104.5 Suzuki XL7 ⌀104.5

Frequently asked questions

What is the PCD of a Daihatsu Feroza?

A Daihatsu Feroza (1987–1998) has a PCD of 5x139.7: 5 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Daihatsu Feroza need a hub centric ring?

The centre bore (hub diameter) of a Daihatsu Feroza is 108.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Daihatsu Feroza?

The recorded original offset is ET19. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Daihatsu Feroza?

With the same PCD (5x139.7) and the same centre bore (108.1 mm), these include: Chevrolet Tracker, Suzuki Grand Vitara, Suzuki Vitara. Offset, width and rim diameter still need checking for each vehicle.

Other Daihatsu models

Trevis 4x100 Materia 4x100 Mira Gino 4x100 Copen 4x100 YRV 4x100 Move L901 4x100 Sirion 4x100 Gran Move 4x100 Move L601 4x110 Terios 5x114.3 Midget II 4x110 Cuore 4x100 All Daihatsu →

Does a value look wrong, or is a version missing? Let us know, we check every report.