Suzuki Jimny JB74 PCD

from 2018

VERIFIED

PCD5x139.7

Centre bore108.1 mm

Offset (ET)ET5

Fixing typeM12x1.25

Tightening torque100 Nm

Original tyres195/80R15

1.5 101 ch ; en Europe, utilitaire 2 places depuis 2021

Wheel spacers 5x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Suzuki Jimny JB74

A Suzuki Jimny JB74 (from 2018) uses a 5x139.7 PCD and a centre bore of 108.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x139.7 required. See all vehicles with 5x139.7.
Centre bore: the wheel must have a centre bore of 108.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 108.1 mm.
Offset: the original is ET5. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.25, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 195/80R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Suzuki Jimny

Previous generation: Suzuki Jimny (1984–1997) — same 5x139.7 bolt pattern, but the centre bore goes from 108.4 to 108.1 mm: hub ring one way, no fit the other way.

Jimny 1984–1997 · 5x139.7 Jimny JB74 from 2018

Vehicles with the same PCD and centre bore

Same 5x139.7 PCD and same 108.1 mm centre bore: wheels from these vehicles bolt on and centre on a Suzuki Jimny JB74 without rings. Offset, width, diameter and caliper clearance still need checking.

Suzuki Grand Vitara 1998–2005 Chevrolet Tracker 1999–2009 Daihatsu Feroza 1987–1998

Will wheels from another vehicle fit your Jimny JB74?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Suzuki Jimny JB74?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Suzuki Grand Vitara 1998–2005 Wheels from Chevrolet Tracker 1999–2009 Wheels from Daihatsu Feroza 1987–1998

Same PCD, different centre bore

These vehicles also use 5x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 108.1 mm, and will not fit if it is smaller.

Suzuki Gand Vitara ⌀104.5 Suzuki XL7 ⌀104.5 Suzuki Vitara ⌀108.4 Suzuki Jimny ⌀108.4 Lada Niva Travel ⌀98.1 RAM RAM 1500 ⌀77.8 Chrysler Aspen ⌀78.1 Kia Sorento ⌀95.1

Frequently asked questions

What is the PCD of a Suzuki Jimny JB74?

A Suzuki Jimny JB74 (from 2018) has a PCD of 5x139.7: 5 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Suzuki Jimny JB74 need a hub centric ring?

The centre bore (hub diameter) of a Suzuki Jimny JB74 is 108.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Suzuki Jimny JB74?

The recorded original offset is ET5. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Suzuki Jimny JB74?

The specified tightening torque is 100 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Suzuki Jimny JB74?

With the same PCD (5x139.7) and the same centre bore (108.1 mm), these include: Suzuki Grand Vitara, Chevrolet Tracker, Daihatsu Feroza. Offset, width and rim diameter still need checking for each vehicle.

Other Suzuki models

E-Vitara 5x114.3 Swift VI 4x100 Invicto 5x114.3 S-Cross II 5x114.3 Across 5x114.3 Swace 5x114.3 Swift V 4x100 Ignis III 4x100 Alivio 4x100 Vitara II 5x114.3 Celerio 4x100 S-Cross 5x114.3 All Suzuki →

Does a value look wrong, or is a version missing? Let us know, we check every report.