FRENES

Wheels from Volvo 745 on Citroen Jumpy: compatible?

Yes, the hub is identical

Same 5x108 PCD and same 65.1 mm centre bore: wheels from Volvo 745 bolt on and centre on Citroen Jumpy without rings. You still need to check the offset and tyres, detailed below.

Volvo 7451984–1992Citroen Jumpy1996–2006
PCD5x1085x98 / 5x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.50M14x1.50
Original wheels ≈6Jx14 ET25 ≈6Jx14 ET31
≈7Jx15 ET38

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Volvo 745 is compared with the one from Citroen Jumpy of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6Jx14 ET25 · 185/70R14 — Check on the car

    Compared with the original ≈6Jx14 ET31 on Citroen Jumpy: shock absorber side −6 mm, wheel arch side +6 mm, tyre diameter −2.2 % : fit it with the original tyre size of Citroen Jumpy (195/70R14), not that of Volvo 745. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Citroen Jumpy (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Citroen Jumpy on Volvo 745?