FRENES

Citroen Jumpy PCD

1996–2006
VERIFIED
⌀58.1
PCD5x98 or 5x108
Centre bore58.1 or 65.1 mm
Offset (ET)ET31 to ET38
Fixing typeM14x1.50
Tightening torque100 Nm
Original tyres195/70R14, 215/65R15
⚠ This model comes with 5x98 or 5x108 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 58.1 mm → Wheel spacers 5x98(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Citroen Jumpy

A Citroen Jumpy (1996–2006) uses a 5x98 or 5x108 PCD and a centre bore of 58.1 or 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x98 or 5x108 required. See all vehicles with 5x98.
  • Centre bore: the wheel must have a centre bore of 58.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 58.1 mm.
  • Offset: the original is ET31 to ET38. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/70R14, 215/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x98 58.1 mm — ET31 195/70R14
Version 2 5x108 65.1 mm — ET38 215/65R15

Vehicles with the same PCD and centre bore

Same 5x98 PCD and same 58.1 mm centre bore: wheels from these vehicles bolt on and centre on a Citroen Jumpy without rings. Offset, width, diameter and caliper clearance still need checking.

Citroen Evasion 1994–2002 Citroen CX 1974–1985 Fiat e-Doblo from 2022 Alfa Romeo 4C 2013–2020 Fiat 500L Trekking from 2013 RAM Promaster City from 2013 Fiat 500L from 2012 Holden Combo from 2011 Fiat Doblo Maxi 2010–2022 Alfa Romeo GT 2003–2010 Lancia Phedra 2002–2010 Peugeot 807 from 2002 Alfa Romeo 147 2001–2010 Fiat Doblo 2001–2005 Alfa Romeo 156 1997–2006 Peugeot Expert 1996–2006

Will wheels from another vehicle fit your Jumpy?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Citroen Jumpy?

A Citroen Jumpy (1996–2006) can have a 5x98 or 5x108 PCD depending on the version: check on an original wheel.

Does a Citroen Jumpy need a hub centric ring?

The centre bore (hub diameter) of a Citroen Jumpy is 58.1 or 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Citroen Jumpy?

The recorded original offset is ET31 to ET38 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Citroen Jumpy?

The specified tightening torque is 100 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Citroen Jumpy?

With the same PCD (5x98) and the same centre bore (58.1 mm), these include: Citroen Evasion, Citroen CX, Fiat e-Doblo, Alfa Romeo 4C. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.