Volvo C40 PCD

from 2021

VERIFIED

Centre bore63.4 mm

Offset (ET)ET50.5

Fixing typeM14x1.50

Tightening torque140 Nm

Original tyres235/60R17

Hub centric rings 63.4 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volvo C40

A Volvo C40 (from 2021) uses a 5x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x108 required. See all vehicles with 5x108.
Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
Offset: the original is ET50.5. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 235/60R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Volvo C40 without rings. Offset, width, diameter and caliper clearance still need checking.

Volvo EC40 from 2024 Volvo EX40 axe arrière from 2024 Volvo EX40 axe avant from 2024 Volvo EX30 from 2023 Volvo EX90 axe arrière from 2023 Volvo EX90 axe avant from 2023 Volvo XC40 from 2017 Volvo V90 Cross Country from 2016 Volvo V60 Cross Country 2015–2018 Volvo V60 Polestar 2014–2018 Volvo V40 Cross Country 2012–2021 Volvo V60 2010–2018 Volvo XC60 2008–2017 Volvo C30 2006–2014 Volvo V50 2004–2012 Volvo S40 1996–2004

Will wheels from another vehicle fit your C40?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Volvo C40?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Volvo XC40 from 2017 Wheels from Volvo XC60 2008–2017 Wheels from Volvo XC90 2002–2014 Wheels from Volvo XC70 2000–2007

Same PCD, different centre bore

These vehicles also use 5x108 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 63.4 mm, and will not fit if it is smaller.

Volvo S60R ⌀65.1 Volvo V70R ⌀65.1 Volvo XC90 ⌀67.1 Volvo S60 ⌀65.1 Volvo XC70 ⌀65.1 Volvo C70 ⌀65.1 Volvo S80 ⌀65.1 Volvo S70 ⌀65.1

Frequently asked questions

What is the PCD of a Volvo C40?

A Volvo C40 (from 2021) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Volvo C40 need a hub centric ring?

The centre bore (hub diameter) of a Volvo C40 is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volvo C40?

The recorded original offset is ET50.5. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volvo C40?

The specified tightening torque is 140 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volvo C40?

With the same PCD (5x108) and the same centre bore (63.4 mm), these include: Volvo EC40, Volvo EX40 axe arrière, Volvo EX40 axe avant, Volvo EX30. Offset, width and rim diameter still need checking for each vehicle.

Other Volvo models

EC40 5x108 EX40 axe arrière 5x108 EX40 axe avant 5x108 EX30 5x108 EX90 axe avant 5x108 EX90 axe arrière 5x108 XC40 5x108 V90 Cross Country 5x108 V60 Cross Country 5x108 V60 Polestar 5x108 V40 Cross Country 5x108 V60 5x108 All Volvo →

Does a value look wrong, or is a version missing? Let us know, we check every report.