Yes, with hub centric rings
Same 5x108 PCD, but the centre bore of the wheels from Volvo XC70 (65.1 mm) is larger than the hub of Volvo V60 (63.4 mm): you need 4 hub centric rings 65.1 → 63.4.
Rings 65.1 → 63.4
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Volvo XC70 is compared with the one from Volvo V60 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
≈7Jx16 ET50 · 215/65R16 — Fits like the original
Compared with the original 7Jx16 ET50 on Volvo V60: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +5.1 % : fit it with the original tyre size of Volvo V60 (205/60R16), not that of Volvo XC70.
Comparison for guidance only (estimated width). Check in detail
- ?
≈7Jx17 ET49 · 215/65R17
Volvo V60 has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Volvo V60 (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Volvo V60 on Volvo XC70?