FRENES

Volvo XC70 PCD

2000–2007
VERIFIED
⌀65.1
PCD5x108
Centre bore65.1 or 63.4 mm
Offset (ET)ET49 to ET50
Fixing typeM14x1.50
Tightening torque140 Nm
Original tyres215/65R17, 215/65R16
Hub centric rings 65.1 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volvo XC70

A Volvo XC70 (2000–2007) uses a 5x108 PCD and a centre bore of 65.1 or 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET49 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/65R17, 215/65R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 65.1 mm — ET49 215/65R17
Version 2 5x108 63.4 mm — ET50 215/65R16

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volvo XC70 without rings. Offset, width, diameter and caliper clearance still need checking.

Volvo S60R 2003–2010 Volvo V70R 2003–2007 Volvo S60 2000–2010 Volvo C70 1998–2006 Volvo S80 1998–2006 Volvo S70 1997–2000 Volvo V70 1997–2000 Volvo V90 1996–1998 Volvo S90 1994–1998 Volvo 850 1991–1993 Volvo 940 1990–1998 Volvo 960 1990–1994 Volvo 740 1984–1992 Volvo 745 1984–1992 Volvo 240 Serie 1974–1993 Volvo 260 Serie 1974–1982

Will wheels from another vehicle fit your XC70?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volvo XC70?

A Volvo XC70 (2000–2007) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Volvo XC70 need a hub centric ring?

The centre bore (hub diameter) of a Volvo XC70 is 65.1 or 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volvo XC70?

The recorded original offset is ET49 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volvo XC70?

The specified tightening torque is 140 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volvo XC70?

With the same PCD (5x108) and the same centre bore (65.1 mm), these include: Volvo S60R, Volvo V70R, Volvo S60, Volvo C70. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.