FRENES

Volvo V60 PCD

2010–2018
VERIFIED
⌀63.4
PCD5x108
Centre bore63.4 mm
Offset (ET)ET37 to ET50
Fixing typeM14x1.50
Tightening torque110 Nm
Original tyres205/60R16, 215/60R16
Hub centric rings 63.4 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volvo V60

A Volvo V60 (2010–2018) uses a 5x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
  • Offset: the original is ET37 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/60R16, 215/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 63.4 mm 7Jx16 ET50 205/60R16
Version 2 5x108 63.4 mm — ET37 215/60R16

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Volvo V60 without rings. Offset, width, diameter and caliper clearance still need checking.

Volvo EC40 from 2024 Volvo EX40 axe arrière from 2024 Volvo EX40 axe avant from 2024 Volvo EX30 from 2023 Volvo EX90 axe arrière from 2023 Volvo EX90 axe avant from 2023 Volvo C40 from 2021 Volvo XC40 from 2017 Volvo V90 Cross Country from 2016 Volvo V60 Cross Country 2015–2018 Volvo V60 Polestar 2014–2018 Volvo V40 Cross Country 2012–2021 Volvo XC60 2008–2017 Volvo C30 2006–2014 Volvo V50 2004–2012 Volvo S40 1996–2004

Will wheels from another vehicle fit your V60?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volvo V60?

A Volvo V60 (2010–2018) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Volvo V60 need a hub centric ring?

The centre bore (hub diameter) of a Volvo V60 is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volvo V60?

The recorded original offset is ET37 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volvo V60?

The specified tightening torque is 110 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volvo V60?

With the same PCD (5x108) and the same centre bore (63.4 mm), these include: Volvo EC40, Volvo EX40 axe arrière, Volvo EX40 axe avant, Volvo EX30. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.