Leapmotor B10 PCD

from 2025

VERIFIED

Centre bore66.6 mm

Offset (ET)ET42 to ET50

Fixing typeM14x1.5

Original tyres225/50R18, 235/50R18

koleso.ee indisponible pour Leapmotor. Sources : tirewheelguide (66.6) et brock.de (66.7). Monte mixte avant/arrière confirmée par les deux.

Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Leapmotor B10

A Leapmotor B10 (from 2025) uses a 5x114.3 PCD and a centre bore of 66.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 66.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.6 mm.
Offset: the original is ET42 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 225/50R18, 235/50R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Style / Design (avant)	5x114.3	66.6 mm	7Jx18	ET42	225/50R18
Style / Design (arrière)	5x114.3	66.6 mm	7.5Jx18	ET50	235/50R18

Will wheels from another vehicle fit your B10?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 66.6 mm, and will not fit if it is smaller.

Leapmotor C10 ⌀73.1 Dacia Bigster ⌀66.1 Hyundai Ioniq 9 ⌀67.1 Kia EV5 ⌀67.1 Mazda CX-5 III ⌀67.1 Mitsubishi Outlander IV ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1

Frequently asked questions

What is the PCD of a Leapmotor B10?

A Leapmotor B10 (from 2025) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Leapmotor B10 need a hub centric ring?

The centre bore (hub diameter) of a Leapmotor B10 is 66.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Leapmotor B10?

The recorded original offset is ET42 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Other Leapmotor models

C10 5x114.3 T03 4x100 All Leapmotor →

Does a value look wrong, or is a version missing? Let us know, we check every report.