FRENES

Hyundai Ioniq 9 PCD

from 2025
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Offset (ET)ET53 to ET58
Fixing typeM12x1.5
Original tyres255/60R19, 275/50R20, 285/45R21
Koleso, wheelfitment.eu et wheelmeasure ne listent pas l'Ioniq 9. Sources : tirewheelguide 2025/2026 (marché USA uniquement) + threepiece.us 2026 (5x114.3, 67.1, 19x8 ET53).
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai Ioniq 9

A Hyundai Ioniq 9 (from 2025) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET53 to ET58. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 255/60R19, 275/50R20, 285/45R21. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Long Range RWD / AWD 5x114.3 67.1 mm 8Jx19 ET53 255/60R19
option 20" 5x114.3 67.1 mm 8Jx20 ET53 275/50R20
Performance / Calligraphy 21" 5x114.3 67.1 mm 9Jx21 ET58 285/45R21

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai Ioniq 9 without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai Santa Fe V from 2024 Hyundai Kona II from 2023 Hyundai IONIQ 6 from 2022 Hyundai Stargazer from 2022 Hyundai i20 N 2021–2024 Hyundai IONIQ 5 from 2021 Hyundai IONIQ 5 N from 2021 Hyundai Tucson IV from 2020 Hyundai Nexo from 2018 Hyundai Santa Fe IV 2018–2023 Hyundai i30 III from 2017 Hyundai i30 N from 2017 Hyundai Kona 2017–2022 Hyundai Ioniq 2016–2023 Hyundai Tucson III 2015–2020 Hyundai i30 II 2012–2017

Will wheels from another vehicle fit your Ioniq 9?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Hyundai Ioniq 9?

A Hyundai Ioniq 9 (from 2025) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Hyundai Ioniq 9 need a hub centric ring?

The centre bore (hub diameter) of a Hyundai Ioniq 9 is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai Ioniq 9?

The recorded original offset is ET53 to ET58 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Hyundai Ioniq 9?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Hyundai Santa Fe V, Hyundai Kona II, Hyundai IONIQ 6, Hyundai Stargazer. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.