FRENES

Maserati 3200 GT PCD

1998–2002
VERIFIED
⌀67.1
PCD5x108
Centre bore67.1 mm
Offset (ET)ET55
Fixing typeM14x1.50
Original tyres235/40R18
Hub centric rings 67.1 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Maserati 3200 GT

A Maserati 3200 GT (1998–2002) uses a 5x108 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/40R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Maserati 3200 GT without rings. Offset, width, diameter and caliper clearance still need checking.

Maserati Gransport from 2006 Maserati Coupe 2001–2007 Ferrari 575 2005–2006 Ferrari F430 Coupe 2004–2009 Ferrari F430 Spider 2004–2009 Volvo XC90 2002–2014 Ferrari 360 Modena 1999–2004 Ferrari 360 Spider 1999–2004 Ferrari 550 Maranello 1996–2002 Ferrari F355 1994–2000 Ferrari F512 1991–1995 Ferrari 348 1989–1995

Will wheels from another vehicle fit your 3200 GT?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Maserati 3200 GT?

A Maserati 3200 GT (1998–2002) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Maserati 3200 GT need a hub centric ring?

The centre bore (hub diameter) of a Maserati 3200 GT is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Maserati 3200 GT?

The recorded original offset is ET55. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Maserati 3200 GT?

With the same PCD (5x108) and the same centre bore (67.1 mm), these include: Maserati Gransport, Maserati Coupe, Ferrari 575, Ferrari F430 Coupe. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.