FRENES

Volvo XC90 PCD

2002–2014
VERIFIED
⌀67.1
PCD5x108
Centre bore67.1 or 63.4 mm
Offset (ET)ET42.5 to ET48
Fixing typeM14x1.50
Tightening torque140 Nm
Original tyres235/65R17
Hub centric rings 67.1 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volvo XC90

A Volvo XC90 (2002–2014) uses a 5x108 PCD and a centre bore of 67.1 or 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET42.5 to ET48. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 67.1 mm — ET48 235/65R17
Version 2 5x108 63.4 mm — ET42.5 235/65R17

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volvo XC90 without rings. Offset, width, diameter and caliper clearance still need checking.

Maserati Gransport from 2006 Ferrari 575 2005–2006 Ferrari F430 Coupe 2004–2009 Ferrari F430 Spider 2004–2009 Maserati Coupe 2001–2007 Ferrari 360 Modena 1999–2004 Ferrari 360 Spider 1999–2004 Maserati 3200 GT 1998–2002 Ferrari 550 Maranello 1996–2002 Ferrari F355 1994–2000 Ferrari F512 1991–1995 Ferrari 348 1989–1995

Will wheels from another vehicle fit your XC90?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volvo XC90?

A Volvo XC90 (2002–2014) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Volvo XC90 need a hub centric ring?

The centre bore (hub diameter) of a Volvo XC90 is 67.1 or 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volvo XC90?

The recorded original offset is ET42.5 to ET48 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volvo XC90?

The specified tightening torque is 140 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volvo XC90?

With the same PCD (5x108) and the same centre bore (67.1 mm), these include: Maserati Gransport, Ferrari 575, Ferrari F430 Coupe, Ferrari F430 Spider. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.